Racores de anillo cortante Ms niquelados
Como fabricante de racores de compresión de latón con superficie niquelada, ofrecemos soluciones duraderas y de alta calidad para sus sistemas de conexión. Nuestros racores de anillo cortante están especialmente diseñados para su uso en entornos exigentes y ofrecen una estanqueidad y resistencia fiables.
Utilizando material de latón de alta calidad y un acabado niquelado, nuestros racores de compresión son resistentes a la corrosión y a temperaturas y presiones extremas. Además, son fáciles de instalar y le permiten conectar de forma rápida y segura sus sistemas de tuberías.
Nuestros racores de compresión están disponibles en una gran variedad de tamaños y estilos para satisfacer sus necesidades. También ofrecemos soluciones personalizadas para garantizar que nuestros productos se adaptan perfectamente a su aplicación.
Nuestro objetivo es ofrecerle accesorios de anillo cortante de latón de alta calidad a un precio asequible, al tiempo que le proporciona un excelente servicio al cliente. Nos enorgullecemos de ofrecer a nuestros clientes con entrega rápida y alta disponibilidad de nuestros productos.
Si está buscando accesorios de anillo de corte de latón fiables y duraderos, ha llegado al lugar correcto.
Utilizando material de latón de alta calidad y un acabado niquelado, nuestros racores de compresión son resistentes a la corrosión y a temperaturas y presiones extremas. Además, son fáciles de instalar y le permiten conectar de forma rápida y segura sus sistemas de tuberías.
Nuestros racores de compresión están disponibles en una gran variedad de tamaños y estilos para satisfacer sus necesidades. También ofrecemos soluciones personalizadas para garantizar que nuestros productos se adaptan perfectamente a su aplicación.
Nuestro objetivo es ofrecerle accesorios de anillo cortante de latón de alta calidad a un precio asequible, al tiempo que le proporciona un excelente servicio al cliente. Nos enorgullecemos de ofrecer a nuestros clientes con entrega rápida y alta disponibilidad de nuestros productos.
Si está buscando accesorios de anillo de corte de latón fiables y duraderos, ha llegado al lugar correcto.
| Datos técnicos: | |
|---|---|
| Material: | Latón niquelado |
| Hilo: | Peso cil. DIN EN ESO 228 con. Rosca DIN EN 10226 (ISO7/DIN 2999) |
| Tallas: | G1/8 - G1/2, R 1/8 - R 1/2 |
| Medio: | Agua, aceite, aire comprimido, medios hidráulicos. Fluidos de funcionamiento neumáticos y oleodinámicos. |
| Temperatura: | máx. 150° grados |
| Presión de funcionamiento: | máx. 60 bar |
| Lorem | Lipsum |
Racor recto roscado, cónico
| ØD | A | B | L | SW1 | SW2 | €/St | Bestell-Nr. |
|---|---|---|---|---|---|---|---|
| 4 | R 1/8 | 8,0 | 27,0 | 10 | 10 | 1,13 | 11.072.504 |
| 6 | R 1/8 | 8,0 | 28,0 | 12 | 12 | 1,19 | 11.072.506 |
| 6 | R 1/4 | 11,0 | 32,5 | 12 | 14 | 1,32 | 11.073.506 |
| 8 | R 1/8 | 7,5 | 29,5 | 14 | 12 | 1,32 | 11.072.508 |
| 8 | R 1/4 | 11,0 | 33,0 | 14 | 14 | 1,40 | 11.073.508 |
| 8 | R 3/8 | 11,5 | 33,0 | 14 | 17 | 1,80 | 11.074.508 |
| 10 | R 1/4 | 11,0 | 37,5 | 19 | 17 | 2,07 | 11.072.510 |
| 10 | R 3/8 | 11,5 | 38,0 | 19 | 17 | 2,27 | 11.073.510 |
| 10 | R 1/2 | 14,0 | 40,5 | 19 | 22 | 2,30 | 11.072.512 |
| 12 | R 3/8 | 11,5 | 39,0 | 22 | 19 | 2,55 | 11.073.512 |
| 12 | R 1/2 | 14,0 | 41,0 | 22 | 22 | 3,01 | 11.074.512 |
| 14 | R 1/2 | 14,0 | 44,5 | 27 | 22 | 3,88 | 11.072.514 |
| 15 | R 1/2 | 14,0 | 44,5 | 27 | 22 | 3,88 | 11.072.515 |
| 16 | R 1/2 | 14,0 | 45,0 | 30 | 24 | 4,61 | 11.072.516 |
| 18 | R 1/2 | 14,0 | 45,0 | 32 | 26 | 5,15 | 11.072.518 |
Racor recto roscado, cilíndrico
| ØD | A | B | L | SW1 | SW2 | €/St | Bestell-Nr. |
|---|---|---|---|---|---|---|---|
| 4 | G 1/8 | 6,0 | 25,0 | 10 | 14 | 1,05 | 11.073.504 |
| 6 | G 1/8 | 6,0 | 25,0 | 12 | 13 | 1,05 | 11.074.506 |
| 6 | G 1/4 | 8,0 | 29,5 | 12 | 17 | 2,41 | 11.075.506 |
| 8 | G 1/8 | 6,0 | 27,5 | 14 | 14 | 1,16 | 11.075.508 |
| 8 | G 1/4 | 8,0 | 30,0 | 14 | 17 | 1,40 | 11.076.508 |
| 10 | G 1/4 | 8,0 | 34,5 | 19 | 17 | 1,73 | 11.074.510 |
| 10 | G 3/8 | 9,0 | 36,0 | 19 | 19 | 2,00 | 11.075.510 |
| 12 | G 3/8 | 10,0 | 40,0 | 22 | 22 | 4,18 | 11.075.512 |
| 12 | G 1/2 | 12,0 | 43,0 | 22 | 22 | 4,35 | 11.076.512 |
Conexión roscada del manómetro
| ØD | A | B | L | SW1 | SW2 | €/St | Bestell-Nr. |
|---|---|---|---|---|---|---|---|
| 4 | G 1/8 | 8,0 | 24,5 | 10 | 14 | 1,53 | 11.074.504 |
| 6 | G 1/8 | 8,0 | 26,0 | 12 | 14 | 1,56 | 11.076.506 |
| 6 | G 1/4 | 11,0 | 30,5 | 12 | 17 | 1,77 | 11.077.508 |
| 8 | G 1/8 | 8,0 | 26,5 | 14 | 14 | 1,66 | 11.078.508 |
| 8 | G 1/4 | 11,0 | 31,0 | 14 | 17 | 1,80 | 11.079.508 |
| 8 | G 3/8 | 11,5 | 31,0 | 14 | 20 | 2,14 | 11.080.508 |
| 10 | G 1/4 | 11,0 | 35,5 | 19 | 17 | 2,37 | 11.076.510 |
| 10 | G 3/8 | 11,5 | 36,5 | 19 | 20 | 2,61 | 11.077.510 |
| 12 | G 3/8 | 11,5 | 34,5 | 22 | 20 | 2,84 | 11.077.512 |
| 12 | G 1/2 | 14,0 | 37,0 | 22 | 24 | 3,20 | 11.078.512 |
| 14 | G 1/2 | 14,0 | 40,0 | 27 | 24 | 4,06 | 11.073.514 |
| 15 | G 1/2 | 14,0 | 38,0 | 27 | 24 | 4,06 | 11.073.515 |
| 16 | G 1/2 | 14,0 | 40,5 | 30 | 24 | 4,54 | 11.073.516 |
| 18 | G 1/2 | 14,0 | 40,0 | 31 | 26 | 5,15 | 11.073.518 |
Conector recto
| ØD | L | SW1 | SW2 | €/St | Bestell-Nr. |
|---|---|---|---|---|---|
| 4 | 34,0 | 10 | 10 | 1,87 | 11.075.504 |
| 6 | 35,0 | 12 | 12 | 2,07 | 11.077.506 |
| 8 | 37,0 | 14 | 14 | 2,30 | 11.081.508 |
| 10 | 46,0 | 19 | 17 | 3,53 | 11.078.510 |
| 12 | 46,0 | 22 | 19 | 4,21 | 11.079.512 |
| 14 | 53,0 | 27 | 24 | 6,29 | 11.074.514 |
| 15 | 50,0 | 27 | 24 | 6,17 | 11.074.515 |
| 16 | 53,5 | 30 | 27 | 7,49 | 11.074.516 |
| 18 | 53,0 | 32 | 27 | 8,02 | 11.074.518 |
Enterramiento de mamparos
| ØD | Bmax | L | SW1 | SW2 | €/St | Bestell-Nr. |
|---|---|---|---|---|---|---|
| 6 | 15,5 | 51,5 | 12 | 14 | 2,51 | 11.078.506 |
| 8 | 16,5 | 55,5 | 14 | 16 | 2,84 | 11.082.508 |
| 10 | 15,5 | 62,5 | 19 | 19 | 4,68 | 11.079.510 |
| 12 | 16,0 | 64,5 | 22 | 22 | 7,79 | 11.080.512 |
| 15 | 18,0 | 69,5 | 27 | 25 | 11,86 | 11.075.515 |
Codo - racor, cónico
| ØD | A | B | C | L | SW1 | SW2 | €/St | Bestell-Nr. |
|---|---|---|---|---|---|---|---|---|
| 4 | R 1/8 | 8,0 | 16,0 | 21,0 | 10 | 9 | 1,46 | 11.076.504 |
| 6 | R 1/8 | 8,0 | 16,0 | 23,0 | 12 | 9 | 1,56 | 11.079.506 |
| 6 | R 1/4 | 11,0 | 20,0 | 24,5 | 12 | 11 | 1,66 | 11.080.506 |
| 8 | R 1/8 | 8,0 | 17,0 | 24,0 | 14 | 11 | 1,90 | 11.083.508 |
| 8 | R 1/4 | 11,0 | 20,0 | 24,0 | 14 | 11 | 1,93 | 11.084.508 |
| 8 | R 3/8 | 11,5 | 24,0 | 27,0 | 14 | 13 | 2,30 | 11.085.508 |
| 10 | R 1/4 | 11,0 | 23,5 | 32,0 | 19 | 13 | 2,64 | 11.080.510 |
| 10 | R 3/8 | 11,5 | 24,0 | 32,0 | 19 | 13 | 2,67 | 11.081.510 |
| 10 | R 1/2 | 14,0 | 28,5 | 34,0 | 19 | 15 | 4,35 | 11.082.510 |
| 12 | R 3/8 | 11,5 | 25,0 | 34,5 | 22 | 15 | 3,23 | 11.081.512 |
| 12 | R 1/2 | 14,0 | 28,5 | 34,5 | 22 | 15 | 3,58 | 11.082.512 |
| 14 | R 1/2 | 14,0 | 30,0 | 38,0 | 27 | 17 | 4,89 | 11.075.514 |
| 15 | R 1/2 | 14,0 | 30,0 | 38,0 | 27 | 17 | 4,97 | 11.076.515 |
| 16 | R 1/2 | 14,0 | 31,5 | 39,5 | 30 | 19 | 5,93 | 11.075.516 |
| 18 | R 1/2 | 14,0 | 34,0 | 44,0 | 32 | 22 | 7,64 | 11.075.518 |
Conector en ángulo
| ØD | L | SW1 | SW2 | €/St | Bestell-Nr. |
|---|---|---|---|---|---|
| 4 | 21,0 | 10,0 | 9 | 0,69 | 11.077.504 |
| 6 | 23,0 | 12,0 | 9 | 2,17 | 11.081.506 |
| 8 | 24,0 | 14,0 | 11 | 2,55 | 11.086.508 |
| 10 | 32,0 | 19,0 | 13 | 10,42 | 11.083.510 |
| 12 | 34,5 | 22,0 | 15 | 4,47 | 11.083.512 |
| 14 | 38,0 | 27,0 | 17 | 6,88 | 11.076.514 |
| 15 | 38,0 | 27,0 | 17 | 6,88 | 11.077.515 |
| 16 | 39,5 | 30,0 | 19 | 8,54 | 11.076.516 |
| 18 | 44,0 | 32,0 | 22 | 10,31 | 11.076.518 |
Racor en T, cónico
| ØD | A | B | C | L | SW1 | SW2 | €/St | Bestell-Nr. |
|---|---|---|---|---|---|---|---|---|
| 4 | R 1/8 | 8,0 | 16,0 | 42,0 | 10 | 9 | 2,20 | 11.078.504 |
| 6 | R 1/8 | 8,0 | 16,0 | 46,0 | 12 | 9 | 2,37 | 11.082.506 |
| 6 | R 1/4 | 11,0 | 20,0 | 48,0 | 12 | 11 | 2,51 | 11.083.506 |
| 8 | R 1/8 | 8,0 | 17,0 | 48,0 | 14 | 11 | 2,78 | 11.087.508 |
| 8 | R 1/4 | 11,0 | 20,0 | 48,0 | 14 | 11 | 2,84 | 11.088.508 |
| 8 | R 3/8 | 11,5 | 24,0 | 54,0 | 14 | 13 | 3,46 | 11.089.508 |
| 10 | R 1/4 | 11,0 | 23,5 | 64,0 | 19 | 13 | 4,35 | 11.084.510 |
| 10 | R 3/8 | 11,5 | 24,0 | 64,0 | 19 | 13 | 4,35 | 11.085.510 |
| 12 | R 3/8 | 11,5 | 25,5 | 69,0 | 22 | 15 | 5,08 | 11.084.512 |
| 12 | R 1/2 | 14,0 | 28,5 | 69,0 | 22 | 14 | 5,08 | 11.085.512 |
| 14 | R 1/2 | 14,0 | 30,0 | 76,0 | 27 | 17 | 7,84 | 11.077.514 |
| 15 | R 1/2 | 14,0 | 30,0 | 76,0 | 27 | 17 | 7,84 | 11.078.515 |
| 16 | R 1/2 | 14,0 | 31,5 | 79,0 | 30 | 19 | 9,38 | 11.077.516 |
| 18 | R 1/2 | 14,0 | 34,0 | 88,0 | 32 | 22 | 11,99 | 11.077.518 |
L - racor, cónico
| ØD | A | B | C | L | SW1 | SW2 | €/St | Bestell-Nr. |
|---|---|---|---|---|---|---|---|---|
| 4 | R 1/8 | 8,0 | 21,0 | 37,0 | 10 | 9 | 2,20 | 11.079.504 |
| 6 | R 1/8 | 8,0 | 23,0 | 39,0 | 12 | 9 | 2,37 | 11.084.506 |
| 6 | R 1/4 | 11,0 | 24,5 | 44,5 | 12 | 11 | 2,51 | 11.085.506 |
| 8 | R 1/8 | 8,0 | 24,0 | 41,0 | 14 | 11 | 2,78 | 11.090.508 |
| 8 | R 1/4 | 11,0 | 24,0 | 44,0 | 14 | 12 | 2,84 | 11.091.508 |
| 8 | R 3/8 | 11,5 | 27,0 | 51,0 | 14 | 13 | 3,46 | 11.092.508 |
| 10 | R 1/4 | 11,0 | 32,0 | 55,5 | 19 | 13 | 4,35 | 11.086.510 |
| 10 | R 3/8 | 11,5 | 32,0 | 56,0 | 19 | 13 | 4,35 | 11.087.510 |
| 12 | R 3/8 | 11,5 | 34,5 | 60,0 | 22 | 15 | 5,08 | 11.086.512 |
| 12 | R 1/2 | 14,0 | 34,5 | 63,0 | 22 | 15 | 5,08 | 11.087.512 |
| 14 | R 1/2 | 14,0 | 38,0 | 68,0 | 27 | 17 | 7,84 | 11.078.514 |
| 15 | R 1/2 | 14,0 | 38,0 | 68,0 | 27 | 17 | 7,84 | 11.079.515 |
| 16 | R 1/2 | 14,0 | 39,5 | 71,0 | 30 | 19 | 9,38 | 11.078.516 |
| 18 | R 1/2 | 14,0 | 44,0 | 78,0 | 32 | 22 | 11,99 | 11.078.518 |
Conexión roscada en T
| ØD | C | L | SW1 | SW2 | €/St | Bestell-Nr. |
|---|---|---|---|---|---|---|
| 4 | 21,0 | 42,0 | 10 | 9 | 2,75 | 11.080.504 |
| 6 | 23,0 | 46,0 | 12 | 9 | 2,95 | 11.086.506 |
| 8 | 24,0 | 48,0 | 14 | 11 | 3,53 | 11.093.508 |
| 10 | 32,0 | 64,0 | 19 | 13 | 4,87 | 11.088.510 |
| 12 | 34,5 | 69,0 | 22 | 15 | 6,24 | 11.088.512 |
| 14 | 38,0 | 79,0 | 27 | 17 | 14,57 | 11.079.514 |
| 15 | 38,0 | 76,0 | 27 | 17 | 9,86 | 11.080.515 |
| 16 | 39,5 | 79,0 | 30 | 19 | 9,86 | 11.079.516 |
| 18 | 44,0 | 88,0 | 32 | 22 | 11,96 | 11.079.518 |
Tuerca de unión
| ØD | A | SW | €/St | Bestell-Nr. |
|---|---|---|---|---|
| 4 | M 8x1 | 10 | 0,29 | 11.072.204 |
| 6 | M 10x1 | 12 | 0,35 | 11.072.206 |
| 8 | M 12x1 | 14 | 0,39 | 11.072.208 |
| 10 | M 16x1,5 | 19 | 0,75 | 11.072.210 |
| 12 | M 18x1,5 | 22 | 0,86 | 11.072.212 |
| 14 | M 22x1,5 | 27 | 1,52 | 11.072.214 |
| 15 | M 22x1,5 | 27 | 1,52 | 11.072.215 |
| 16 | M 24x1,5 | 30 | 1,84 | 11.072.216 |
| 18 | M 26x1,5 | 32 | 2,07 | 11.072.218 |
Anillo de corte
| ØD | €/St | Bestell-Nr. |
|---|---|---|
| 4 | 0,18 | 16.109.204 |
| 6 | 0,18 | 16.109.206 |
| 8 | 0,20 | 16.109.208 |
| 10 | 0,30 | 16.109.210 |
| 12 | 0,33 | 16.109.212 |
| 14 | 0,33 | 16.109.214 |
| 15 | 0,33 | 16.109.215 |
| 16 | 0,38 | 16.109.216 |
| 18 | 0,45 | 16.109.218 |
Manguito de refuerzo
| ØD | €/St | Bestell-Nr. |
|---|---|---|
| 2 | 0,10 | 16.110.202 |
| 4 | 0,15 | 16.110.204 |
| 6 | 0,27 | 16.110.206 |
| 8 | 0,30 | 16.110.208 |
| 9 | 0,32 | 16.110.209 |
| 10 | 0,38 | 16.110.210 |
| 11 | 0,38 | 16.110.211 |
| 12 | 0,56 | 16.110.212 |
| 14 | 0,59 | 11.110.214 |
| 18 | 0,68 | 16.110.218 |
Reducción, 2 partes
| ØD | ØC | €/St | Bestell-Nr. |
|---|---|---|---|
| 6 | 4 | 0,68 | 16.109.506 |
| 8 | 6 | 0,68 | 16.109.508 |
| 12 | 8 | 0,68 | 16.109.512 |
Enchufe
| ØD | ØC | L | €/St | Bestell-Nr. |
|---|---|---|---|---|
| 4 | 6 | 7,5 | 0,51 | 16.111.204 (Messing blank) |
| 6 | 8 | 10,0 | 0,51 | 16.111.206 (Messing blank) |
| 8 | 11 | 18,6 | 1,01 | 12.111.208 (Stahl verzinkt) |
Adaptador
| ØD | ØC | L | SW | €/St | Bestell-Nr. |
|---|---|---|---|---|---|
| 6 | 8 | 34,0 | 12 | 1,63 | 11.087.506 |
| 8 | 10 | 42,0 | 12 | 2,03 | 11.094.508 |
Pieza de anillo
| G | ØD | A | B | L | SW | €/St | Bestell-Nr. |
|---|---|---|---|---|---|---|---|
| G 1/8 | 4 | 10,0 | 14,5 | 24,5 | 10 | 1,66 | 11.081.504 |
| G 1/8 | 6 | 10,0 | 14,5 | 26,5 | 12 | 1,77 | 11.088.506 |
| G 1/4 | 6 | 13,3 | 14,5 | 28,5 | 12 | 1,80 | 11.089.506 |
| G 1/8 | 8 | 10,0 | 14,5 | 25,5 | 14 | 1,83 | 11.095.508 |
| G 1/4 | 8 | 13,3 | 14,5 | 28,0 | 14 | 1,90 | 11.096.508 |
Perno banjo 1 pliegue
| A | B | C | L | SW | €/St | Bestell-Nr. |
|---|---|---|---|---|---|---|
| G 1/8 | 7,5 | 15,0 | 28,0 | 14 | 0,98 | 11.073.218 |
| G 1/4 | 9,0 | 16,5 | 29,5 | 17 | 1,25 | 11.073.214 |
| G 3/8 | 13,5 | 17,5 | 31,5 | 24 | 1,69 | 11.073.238 |
Enviar solicitud:
Cutting ring fittings Ms nickel-plated
Envíenos un breve mensaje y estaremos encantados de responder a sus preguntas por teléfono o correo electrónico.